Coney wrote:Hreizi wrote:Coney wrote:i take it for 35 okey ?
Þetta passar ekki á 4 doors bíl, alltof breiður fyrir hann, ef þú ert að hugsa um það
var einmitt að spá í þessu efitr að ég póstaði
C/P Frá E46fanatics:
Front Bumper:
Difficulty: 4/10
DIY: Maybe.
Installation:
- Coupe: http://www.e46fanatics.com/howto/how...hp?howto_id=40
- Sedan: http://www.e46fanatics.com/howto/how...hp?howto_id=41
Part Numbers:
- Re-Bar: http://www.realoem.com/bmw/showparts...29&hg=51&fg=15
- Bumper: http://www.realoem.com/bmw/showparts...81&hg=51&fg=15
This will fit on okay, but will need some tinkering to fit flush with the stock non-m fenders. Without modification, the bumper sits about an inch and a half forward and the sides flare out an inch or so; on a sedan, it's a slightly bigger gap. To fix this, some people opt for the OEM CF reinforcement bar and stretch the sides in a little bit, while others simply shave down the stock bar to allow the bumper to sit farther back.
Safe Alternatives:
- OEM Mtech2 front bumper (available at your local BMW dealership)
- M3/ CSL replica bumper (available through many of the sponsors here at e46)
Þráðinn má skoða í fullri lengd hér.
